MDSAP Audit Days Calculation: A Complete Guide to Audit Timeline!
Views:40
Time:2026-11-19 14:13:35


Do you export medical devices and plan MDSAP single audit? Many manufacturers are confused: why does MDSAP audit take 5 days for some companies but 7 days for ours? What criteria determine audit days? The answer lies in the core MDSAP document AU P0008 《Audit Time Determination Procedure》(Version AU P0008.008, released on 2023-10-13). This document is the mandatory basis for MDSAP-recognized Auditing Organizations (AOs) to calculate audit man-days and prepare audit plans. Its supporting form is MDSAP AU F0008.2 《Audit Duration Calculation Form (Audit Model 2017)》.


原
文
链
接


https://www.mdsap.global/documents/library/audit-time-determination-procedure

一、Purpose of This Document



MDSAP AU P0008 specifies that all MDSAP-recognized AOs must apply the criteria in this document to calculate audit man-days for medical device manufacturers.

In short: 

AOs cannot arbitrarily set audit days based on experience. 

The same calculation model applies to initial certification, surveillance audit and recertification audit. 

Adjustments shall be made according to actual business, headcount and product risk of the enterprise. 

Calculation records shall be retained as supporting evidence for the audit plan.


Note:The calculated result is the base audit time. AOs may add extra audit time with justifiable reasons to achieve audit objectives.


二、Core Calculation Logic



AU P0008 adopts a task-based calculation model, instead of simple multiplication by headcount. It breaks down seven quality management processes, counts applicable audit tasks for each process, sums the base man-hours with standard time for each task, and then applies various adjustment factors.

(一)Seven MDSAP Audit Process Modules:
  • Management
  • DMA&FR: Device Marketing Authorization and Facility Registration
  • MA&I: Measurement, Analysis and Improvement
  • MDAE&ANR: Medical Device Adverse Event and Advisory Notice Reporting
  • D&D: Design and Development
  • P&SC: Production and Service Control (with the largest number of audit tasks)
  • Purchasing

There are 90 standard audit tasks in total under these processes. Tasks for activities not involved in the business can be excluded. For multiple product lines or production lines, some tasks shall be counted repeatedly.

(二)Calculation Rules for Different Audit Types
Initial Certification Audit (Stage1 + Stage2):Calculate base man-hours of all applicable tasks per AU P0008 and apply adjustment factors. Stage1 may be conducted partially off-site. AOs may arrange two separate on-site visits or combine Stage1 and Stage2 into one on-site audit.
Surveillance Audit:Select audit tasks to be covered in this cycle per Appendix 1, calculate base time, apply adjustment factors and make adjustments referring to results of the previous MDSAP audit.

Audits without Stage 1:Identify applicable tasks directly, apply the algorithm and adjustment factors to get total audit man-hours.


三、Key Adjustment Factor: Company Size May Reduce Audit Man-days



The document sets a headcount adjustment factor. Audit time can be reduced proportionally for companies with 1–100 employees. No discount applies to companies with more than 100 employees.

Total EmployeesAudit Time Reduction
1–5-42%
6–10-39%
11–15-35%
16–25-28%
26–45-18%
46–65-14%
66–85-10%
86–100-5%

Important Reminder: Reduction is not unlimited. Comprehensive assessment shall be performed considering product complexity, multiple sites, multiple product lines, previous non-conformities and special processes (sterile, implantable devices, etc.). AOs shall document all adjustment justifications and shall not reduce audit time merely by applying the headcount discount.


四、Supporting Form: AU F0008.2



The official supporting form AU F0008.2 Audit Duration Calculation Form (Audit Model 2017) is the template for this algorithm. AOs shall fill in:
  • Applicable / non-applicable audit tasks
  • Base calculated man-hours
  • Adjustment factors for scale, risk, etc.
  • Explanation for extra man-hours added by AO

The final audit man-days shall be output and filed as an attachment to the audit plan.

五、Practical Recommendations for Medical Device Manufacturers



(一)Evaluate audit man-days in the initiation phase to control project budget
Do not focus only on quotations. Ask how audit man-days are calculated under the AU P0008 model, and whether your product lines, processes and staff size are considered. For the same MDSAP audit, sterile and implantable products involve far more audit tasks than general Class II devices.

(二)Verify consistency between the audit plan and AU P0008 calculation
On-site man-days stated in the issued audit plan shall match the result from AU F0008.2. If there is a large discrepancy, you may request a written explanation from the auditing organization.

(三)Small enterprises shall not expect excessive reduction of audit days blindly
Headcount discount is available, but high-risk products, multiple production lines or complex design and development will still increase total audit man-hours.

(四)Important Distinction
The calculated man-hours refer only to audit time, excluding report writing and non-conformity closure time.
六、Conclusion



Many manufacturers assume MDSAP audit days are fixed. After reading AU P0008, you will know that MDSAP audit duration is generated by a quantitative model and varies for each company. Understanding these rules helps you avoid inaccurate timeline estimation at the early project stage, communicate audit plans professionally with AOs and reduce disputes during project execution.For further inquiries, please contact Wiselink.


Contact Us
Fill Form
Whether you need more information or wish to cooperate with us, we will guide you through every step of the regulatory process. Subscribe to our newsletter for the latest global regulatory updates.